Cut extrude - Up to Surface
Now we will learn to use the extrude feature to cut the part.
The initial step we have to do is make a sketch on the plane 7.
Sketch the conditions must be closed.
Click Extruded Cut on the Features toolbar, or click Insert, Cut, Extrude
Set PropertyManager options.
Set initial conditions for the cut-extrude
Select the Sketch Plane to start the extrude from the plane where the sketch is.
Direction 1
End Condition. Determine how widespread these features. Set the end condition type.
If necessary, click Reverse Direction to extend these features in the opposite direction to that shown in the preview.
Up to Surface. Select a face or a plane to expand into the areas of graphics on Face / Plane.
Double-click the surface to change the End Condition to get to the Surface, a surface is selected as the surface termination.
If the sketch is in the extrude extends beyond the selected face or body surface,
Up To Surface can do some extension of the otomatissetiap one to end the extrusion.
