Cut Surface solid bodies
Now we will learn to cut the solid bodies using the surface.
Steps should we do before cutting solid bodies is that we must make the first surface is in use as a cutting tool.
To make sweept surface is:
Create a sketch on profile planes to sweep, sweep the path, and guide curves.
Sketch sweep profile and path to the planes that we make.
We can also make a sketch sweep the path in the model face.
Once we make a sweep surface, we just do the cut surface.
Here we can do the cutting of a solid model by removing the material by using the Surface.
To cut a solid body with the Surface, we have to do is:
Click on the Cut With Surface Features toolbar, or click Insert> Cut> With Surface.
In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies.
Examine the preview. If Necessary, click Flip cut to reverse the direction of the cut.
The arrow points in the direction of the solid to discard.
In PropertyManager, Cut Surface Parameters, select the surface that will be used for cutting solid bodies.
Click the preview. If necessary, cut the Flip to reverse the direction of cutting.
Arrow points to the direction of a solid is discarded.
